Skip to content

Secure Shield Factory

Armored ambulance

A van-based ambulance with an armored crew cab and patient compartment, built for medical teams in high-risk areas.

Featured project

  • VehicleVan-based ambulance
  • Intended useEmergency medical response in high-risk areas
  • LocationIraq
  1. RequirementProtect the crew and the patient during transfers while keeping the space and equipment a working ambulance needs.
  2. Our approachBallistic steel lines the cab and the patient compartment behind the interior panels, and armored glass replaces the windows. The floor is reinforced, and the suspension and brakes are matched to the added weight.
  3. Vehicle deliveredAn ambulance with a full medical interior, wipe-clean surfaces, emergency lighting and siren, and run-flat tyres.

Protection specification

Armor for the cab and patient compartment is specified to BR6 against 7.62 mm rifle rounds and agreed for each project.

Placeholder. Replace with an approved photo of an ambulance project.
Exterior
  • Armored cab and patient compartment
  • Armored glass in the cab and rear doors
  • Suspension and brakes matched to the added weight
Front of an ambulance with mirrored lettering
Front
Ambulance in the workshop
In the workshop

Protection level

Protection levelBR6 · VR7EN 1063 · VPAM BRV
Assault rifle protection7.62 × 51 mm
Blast protection2 × DM-51
WeaponBulletMassTest rangeVelocity
7.62 × 51 mm
FJ/PB/SC
9.5 g10 ± 0.5 m830 ± 10 m/s
7.62 × 39 mm
FJ/PB/FeC
8.0 g10 ± 0.5 m720 ± 10 m/s

The figures are the test conditions the standard defines. The level for each vehicle is confirmed in its project documents.

Our approach

Built around the mission.

We review the vehicle, its intended use and the requested protection level before defining the scope. Our team then carries out the work and inspects the vehicle before handover.

Plan your project

  • Step 01Vehicle or project
  • Step 02Intended use
  • Step 03Protection options
  • Step 04Quality guide
  • Step 05How we work
  • Step 06Enquiry

What to notice

Interior detail of an ambulance

Integrated protection

Armor is fitted behind the medical interior panels, so the treatment space stays clear.

Front of an ambulance with mirrored lettering

Practical everyday use

Reflective markings and mirrored front lettering stay as on a standard ambulance.

Rear interior of a white ambulance

Careful finishing

Cabinets, stretcher mounts and surfaces are refitted for cleaning and daily use.

Have a vehicle or site to discuss?

Tell us what you need. Our team will review your enquiry and advise on the next step.