Skip to content

Secure Shield Factory

Armored wheel loaders and bulldozers

Operator cabs rebuilt as protected cells, with plating over the engine, hydraulics and fuel tank.

Featured project

  • VehicleWheel loaders and tracked bulldozers
  • Intended useEngineering and clearance work in high-risk areas
  • LocationIraq
  1. RequirementKeep the operator protected while the machine clears obstacles and moves earth under the threat of small-arms fire and fragments.
  2. Our approachEach cab was replaced by an armored cell in ballistic steel with armored glass on all sides, mounted on the original cab points. Louvred plates shield the radiator and engine bay without blocking airflow, and guards cover the hydraulic lines, cylinders and fuel tank.
  3. Vehicle deliveredMachines that keep their lift capacity and all-round visibility, with service hatches for daily checks and a finish in the client’s colour.

Protection specification

Cab armor and glass are specified to BR6 against 7.62 mm rifle rounds. Plating of the engine and hydraulics is agreed for each machine.

Grey armored wheel loader with its bucket raised
Exterior
  • Armored operator cell with glass on all sides
  • Louvred armor over the radiator and engine bay
  • Guards on hydraulic lines, cylinders and fuel tank
Grey armored bulldozer with protected cab
Bulldozer
Yellow armored wheel loader with its bucket raised
Wheel loader

Protection level

Protection levelBR6 · VR7EN 1063 · VPAM BRV
Assault rifle protection7.62 × 51 mm
Blast protection2 × DM-51
WeaponBulletMassTest rangeVelocity
7.62 × 51 mm
FJ/PB/SC
9.5 g10 ± 0.5 m830 ± 10 m/s
7.62 × 39 mm
FJ/PB/FeC
8.0 g10 ± 0.5 m720 ± 10 m/s

The figures are the test conditions the standard defines. The level for each vehicle is confirmed in its project documents.

Our approach

Built around the mission.

We review the vehicle, its intended use and the requested protection level before defining the scope. Our team then carries out the work and inspects the vehicle before handover.

Plan your project

  • Step 01Vehicle or project
  • Step 02Intended use
  • Step 03Protection options
  • Step 04Quality guide
  • Step 05How we work
  • Step 06Enquiry

What to notice

Grey armored wheel loader seen from the front

Integrated protection

The armored cell sits on the original cab mounts, so the machine’s structure is not cut or weakened.

Yellow armored loader with a protected cab, front view

Practical everyday use

Louvres keep cooling air moving through the armor, so the machine can work full shifts.

Grey armored bulldozer seen from the front

Careful finishing

Hatches and removable panels keep filters, hoses and grease points within reach.

Have a vehicle or site to discuss?

Tell us what you need. Our team will review your enquiry and advise on the next step.